Unlike other home products, the sunroom application is somewhat special. It targets the outdoor space part of the house. Commonly used in terrace, balcony, patio and so on. Experiencing long-term wind and sunshine, storm and snow attack, sunroom is highly tested. Therefore, we need to pay attention to which performance of the sunroom?
1.Safety
As a place for leisure and recreational activities, the safety of the sunroom should be put in the first place, and a good profile structure can ensure the safety factor of the sunroom, and maintain the overall stability of the building in the face of strong winds, earthquakes and other natural disasters. Will not be like the following picture, a gale roof will be blown away, not only to their own losses, but also to bring danger to others.
The mainstream profile of the sunroom on the market is aluminium alloy, which has a very high safety factor. Aluminium alloy sunroom can withstand 14-level typhoon, 100kg snow load, and can cope with extreme weather conditions.
If it is a mobile sunroom, in addition to the high-strength aluminium alloy structure load-bearing, but also increased the safety lock design, after locking up, you can ensure that the sunroom module is fixed and not shaking, full of security.
2. Heat insulation
In the hot summer, 30 degrees outside and 40 degrees inside the sunroom? This is not good. As a high-end sunroom, it must ensure the heat insulation performance, which can be solved from the aspect of plate or structure.
First of all, let's talk about the material. It is not recommended to use traditional glass, the thermal insulation effect of glass is very poor. The high temperature in summer makes the indoor temperature skyrocket, and in winter, a lot of heat will be lost through the glass. So the rise of polycarbonate PC boards, insulation effect is 7%-25% higher than the equivalent glass.
In addition, you can replace the fixed sunroom with a mobile sunroom design that can be retracted and folded at any time, opening and closing freely. The main purpose of this is to transfer heat out quickly, thus lowering the indoor temperature.
3. Sealing
Don't want the sunroom to leak? Then be sure to pay attention to the good sealing work. Especially the articulation of the top frame and the wall, most of the sunroom leakage location is from there.
In addition to acceptance of the sunroom, you can use the hose to water the sunroom for 10-20 minutes, do a waterproof test to see if there is water seepage phenomenon occurs.
Mobile Phone:
Phone:
Contact Now